Tapered Bemo Roofing Sheet Roll Forming Machine

Bemo Sheet Roll Forming Machine, Tapered Roofing Sheet Roll Forming Machine:

A. Technical data of tapered bemo roof roll forming machine:

1. Electric requirement:380v /3ph/50hz

2. Hydraulic motor power:7.5 kw, tapered bemo roof roll forming machine

3. Weight:5 tons, tapered bemo roof roll forming machine

4. Machine installation dimension:(lxwxh ) 7mx1.5 mx1.3 m

5. Forming speed:10 - 15 m per min, tapered bemo roof roll forming machine

6. Thickness 0.4 - 0.8 mm, 0.5 mm for test run and inspection, tapered bemo roof roll forming machine

7. Material width: Approx.750 or 610 mm

8. Effective width of roof profile:610 or 470 mm, tapered bemo roof roll forming machine

9. Max. Material strengthen: Cold rolled, pre-painted or galvanized coils or galvalume coils

10. Cutting tolerance: Approx.2mm (length = 5, 000mm)

B. Features of tapered bemo roof roll forming machine:

- interconvert automatically two levels of speed when stop and start.

- automatically shearing at any length with pre-setting quantity (10 programs).

- signal feedback from encoder showing current length of product, tapered bemo roof roll forming machine

- automatically alarm to rear shearing before the order finished.

- two shearing sets, one in the front and one in the rear, tapered bemo roof roll forming machine

- rolling wheel and shearers made of alloy steel, thermo-hardened, chromium plating get hardness 60-65hrc.

- hydraulic system is equipped with water cooling system to allow the machine working constantly from 12 to 16 hours per day.